Description
Dune Kit Kat Mosaic Tile in Ivory Gloss Finish brings a finger relief to a soft greige, a light beige clouded with grey. Dune’s own product copy points Kit-Kat finger tiles towards commercial interiors, naming bars, counters, shelves and columns. Each piece is 8mm porcelain, 115x231mm, with pre-cuts between the fingers.
The Dune datasheet for code 188916 is useful reading: resistance to stains is 5 under UNE EN ISO 10545-14, chemical resistance is LA, scratch hardness is 5, water absorption is E ≤ 0.5% and breaking strength exceeds 35 N/mm². Frost and crazing resistance both pass.
Technical Specifications
| Format | 11.5×23.1cm (115x231mm) |
|---|---|
| Thickness | 8mm |
| Finish | Gloss (Ivory) |
| Material | Porcelain |
| Faces (graphic variation) | 6 |
| Shade variation | V3 |
| Water absorption (UNE EN ISO 10545-3) | E ≤ 0.5% |
| Chemical resistance (UNE EN ISO 10545-13) | LA |
| Chemical resistance, swimming pool (UNE EN ISO 10545-13) | A |
| Scratch hardness (UNE EN 67-101) | 5 |
| Crazing resistance (UNE EN ISO 10545-11) | Pass |
| Resistance to stains (UNE EN ISO 10545-14) | 5 |
| Breaking strength (UNE EN ISO 10545-4:9) | > 35 N/mm² |
| Frost resistance (UNE EN ISO 10545-12) | Pass |
| Slip resistance | Not listed on the datasheet |
| Pieces per m² | 37.64 |
| Pieces per box | 24 |
| Coverage per box (m²) | 0.64 |
| Weight per box (kg) | 10.94 |
Where to Use
- Bar fronts and back bar walls in restaurants and hotels
- Hotel bathroom and shower walls, with shower walls ticked by Dune
- Exterior decorative walls at entries and terraces, a ticked use
- Spa and steam room walls, part of Dune’s high condensation tick
- Pool hall walls, marked as a use by Dune; not pool floors or steps
How to Apply
- Prepare the background: provide a firm, level, dry and clean wall; make good cracks, level out deviations beyond 2mm and check moisture sits under 2%.
- Specify C2 adhesive: Dune lists C2 cementitious adhesive for porcelain; test with at least two pieces before full installation.
- Lay from the base: trowel about 3mm of adhesive, rake it with a no. 3 notched trowel and set tiles before the surface dries, working upward. Do not spot bond.
- Control joints and lippage: a 2mm minimum, 3mm in areas of severe thermal movement, sized to the pre-cuts, with self levelling spacers and no offset beyond 25%.
- Grout and maintain: grout joints and grooves in full, use epoxy grout near water, and clean with neutral pH products.
Colour and Finish
Ivory’s gloss glaze has 6 faces with graphic variation, a V3 shade grade and an irregular texture, so a counter front shows gentle greige and grey tonal play; mix boxes as you work.
Other gloss colours include Snow, Musgo, Water, Ocean, Grass and Noche, with a matt Kit-Kat line alongside.
Important Notes
- Order the full quantity in one go and from a single batch, as shade varies between batches.
- Values shown are Dune’s published datasheet results for Kit-Kat Mosaic Ivory Glossy, issued 15-09-2026.
- Have the installer check colour, finish and thickness before fixing; Dune accepts no claims on installed material.
- According to Dune, Kit-Kat’s pre-cut grooves can contain small pores that grout conceals.
- Kit-Kat lists no slip result and every floor use is marked NO, so keep Ivory on vertical surfaces.
