Description
CRC Soft Seal Corrosion Inhibitor is a long-term indoor/outdoor corrosion inhibitor built for machined surfaces and assemblies facing extended periods of storage or genuinely adverse shipping conditions. It works by displacing existing moisture from the metal surface and then leaving behind a transparent, amber waxy film that provides heavy, ongoing protection for parts, equipment and machinery rather than a quick, temporary coating.
That protection specifically covers heat, humidity and corrosive atmospheres, and it’s rated for use even where equipment is exposed to salt spray and other genuinely corrosive shipping conditions — a real consideration for anything being freighted by sea or stored outdoors for an extended period. Unlike some protective coatings, the film never becomes brittle and will not craze over time, so it continues performing rather than cracking and letting moisture back in as it ages.
It’s genuinely suited to precision and machined components specifically — valves, cable end seals, dies, moulds, bits, spindles and instrumentation — as well as broader equipment like motors, shafts and outdoor-stored raw materials or finished stock. That range makes it a practical choice for workshops and warehouses protecting a mix of precision parts and larger equipment with the same product.
Because it’s rated for both indoor and outdoor use, the same product covers equipment protected in a warehouse as well as machinery genuinely exposed to the elements during outdoor storage or transit. Keeping treated equipment properly protected through a full shipping cycle, rather than just during short-term storage, is exactly the scenario Soft Seal’s amber waxy film is designed around.
Technical Specifications
| Formula | Amber waxy corrosion-inhibiting film |
|---|---|
| Colour | Transparent amber |
| Size | 300g aerosol can |
| Application | Indoor and outdoor |
Where to Use
- Valves, cable end seals, dies, moulds, bits and spindles
- Instrumentation, motors and shafts
- Equipment exposed to the elements or outdoor storage
- Parts and equipment during shipping, including salt spray exposure
How to Apply
- Shake the can well — before use for consistent spray.
- Apply an even coat — directly to the clean, dry surface of the part or equipment.
- Allow the film to form — the waxy protective layer develops as the product cures.
- Store or ship as normal — the film provides ongoing protection through the storage or transit period.
Important Notes
- Use in a well-ventilated area.
- Refer to the product’s Safety Data Sheet for full handling and hazard information.
- Suited to long-term protection rather than a quick, temporary coating.
