Crush Rock 20mm

SKU: CRUSHROCK2
From $75.00 / m³

Choose how you’ll get it

Pick up Free

Choose collection point

Delivery not available

We don't freight this item, so it's collection only.

If you need to have this delivered, simply provide us with product and delivery details using the Contact Us form.

Collect from: Keilor East

Crush Rock 20mm is crushed rock that keeps its fines, which lets it compact into a firm base instead of staying loose like a clean screening. It is the standard base under driveways, paths and paving, or a finished gravel drive surface. Sold loose by the cubic metre in quarter-m3 steps for pickup from Keilor East.

Enter how much you need in m³. We work out the quantity to supply from the purchase step. m³

Minimum 0.25 m³ · Sold in steps of 0.25 m³

Units required: 0 (incl. wastage)
Quantity needed: m³ (incl. 10% wastage)
Quantity supplied: m³
Estimated total:

Description

Crush Rock 20mm is crushed rock that keeps its fines, so it compacts into a firm, stable base. It is used for driveways, paths and hardscapes, either as the base under pavers or a topping, or as a finished gravel surface on an informal driveway or path.

Compaction is what makes it work. Spread it in layers and compact each one, ideally with a hired plate compactor for anything bigger than a small path. Left loose, crushed rock shifts and ruts under traffic.

Because it compacts tight, it is not a drainage stone. Grade the finished surface so water runs off, and use Screening 20mm where you need free drainage. Base depth depends on your soil and traffic; check with your builder or engineer for driveways.

Technical Specifications

Material Crushed rock
Size 20mm
Application Paths, driveways, bases
Sold as Loose, by the cubic metre in quarter-m3 steps
Collection Pickup from Keilor East, Melbourne

Where to Use

  • Driveways, as a base layer or finished surface
  • Garden and general access paths
  • Base under pavers and paving

How to Apply

  1. Excavate to depth – remove topsoil and excavate to the base depth: about 75 to 100mm for a path, 100 to 150mm for a driveway, plus the finished surface.
  2. Spread in layers – lay in manageable layers rather than one deep pour.
  3. Compact each layer – compact thoroughly before adding the next layer.
  4. Grade for drainage – ensure a slight fall away from structures.
  5. Finish as required – use as the finished surface, or add pavers or a topping layer on top.

Important Notes

  • Compact in layers for a stable result; uncompacted rock shifts and ruts under traffic.
  • Not a drainage stone: it compacts tight. Use Screening 20mm for drainage.
  • Base depth depends on your soil and traffic; check with your builder or engineer for driveways.
  • Can serve as a finished surface or a sub-base depending on the job.
  • Pickup from Keilor East (Melbourne). Sold loose by the cubic metre in quarter-m3 steps; part loads of a quarter, half and three-quarter cubic metre are available.
  • Crushed stone contains crystalline silica: keep it damp when spreading or sweeping, avoid breathing the dust, and wear a P2 mask if it is dry and dusty.
  • Roughly 1.5 tonnes per cubic metre: a quarter cubic metre is about 375 kg.
  • Further reading: Crushed stone (Wikipedia).

Key Features

  • 20mm crushed rock with fines, compacts into a firm base
  • Base layer under driveways, paths and paving, or a finished gravel drive
  • Typical compacted depth: 75 to 100mm for paths, 100 to 150mm for driveways
  • One cubic metre gives roughly 8 to 9 square metres at a compacted 100mm
  • Roughly 1.5 tonnes per cubic metre
  • Sold loose by the cubic metre in quarter-m3 steps
  • Pickup from Keilor East, Melbourne

Frequently asked questions

What is Crush Rock 20mm used for?

A compacted base under driveways, paths and paved areas, and a finished gravel surface on informal driveways and paths. It is chosen because it compacts into a firm base. It is not a drainage stone; use Screening 20mm for drainage.

How is Crush Rock 20mm different from Screening 20mm?

Crush Rock 20mm contains fines, so it locks together under a compactor into a firm base. Screening 20mm is a clean single-size stone with the fines removed, so it stays loose and free-draining. Use crushed rock for bases and screenings for drainage trenches.

How deep should a crushed rock base be, and how much do I need?

A garden path usually needs 75 to 100mm compacted, a residential driveway 100 to 150mm, laid and compacted in layers of about 75mm. One cubic metre gives roughly 8 to 9 square metres at a compacted 100mm. At about 1.5 tonnes per cubic metre, a quarter load is roughly 375 kg. Base depth depends on your soil and traffic, so check with your builder or engineer for driveways.

How is it sold?

Loose by the cubic metre in quarter cubic metre steps, for pickup from Keilor East. Quarter, half and three-quarter cubic metre part loads are available.

Related Products

Added to cart

View cart