Dune Agadir Piedra Gloss Subway Tile

Part of the Agadir range by Dune

SKU: EI-Dune-AgSw-188547
Brands: ,
Original price was: $129.00.Current price is: $115.00. / sq.m

Choose how you’ll get it

Delivery

Enter your postcode for a delivery date.

Pick up Free

Choose collection point

Collect from: Tullamarine

Piedra gives Dune’s Agadir series a cool grey, glossy option: a porcelain subway piece whose slightly uneven face reads as crafted stone rather than plain grey. Specifiers use it for bathroom walls, splashbacks and vertical feature panels. Each carton packs 45 pieces, giving 0.88 m² of coverage.

Pop in your area and we'll work out how many packs you need. We always round up to full boxes so you're never caught short. sq.m

Each pack covers 0.882 sq.m

Packs required: 0 (incl. wastage)
Area needed: sq.m (incl. 10% wastage)
Area supplied: sq.m
Estimated total:

Description

Stacked vertically, each 280mm length of Dune Agadir Piedra emphasises height; laid horizontally in stack bond, the same tile stretches a narrow wall. This cool grey gloss subway tile is 70x280mm (7x28cm) and 9mm thick, porcelain made by Dune in Spain for Agadir, a series shaped by the Moroccan city’s zellige and Berber craft. Piedra is Spanish for stone.

Its datasheet shows water absorption of 0.5% < E ≤ 3% under UNE EN ISO 10545-3, breaking strength over 30 N/mm² and compliant crazing, frost and thermal shock results. At Class 0 for slip under UNE-EN 16165 Annex C, Piedra suits bathroom walls, splashbacks and feature panels, not wet floors.

Technical Specifications

Format 70x280mm (7x28cm)
Thickness 9mm
Finish Gloss, irregular texture
Material Porcelain
Faces (graphic variation) 21
Dimensions (UNE EN ISO 10545-2) ± 0.6%
Water absorption (UNE EN ISO 10545-3) 0.5% < E ≤ 3%
Chemical resistance (UNE EN ISO 10545-13) GA
Flatness (UNE EN ISO 10545-2) ± 0.5%
Crazing resistance (UNE EN ISO 10545-11) Complies
Resistance to stains (UNE EN ISO 10545-14) 5
Breaking strength (UNE EN ISO 10545-4:9) >30 N/mm²
Frost resistance (UNE EN ISO 10545-12) Complies
Resistance to thermal shock (UNE EN ISO 10545-9) Complies
Slip resistance (UNE-EN 16165 Annex C) Class 0
Pieces per box 45
Pieces per m² 51.02
Coverage per box (m²) 0.88
Weight per box (kg) 16.65

Where to Use

  • Vertical stack feature walls
  • Bathroom and shower walls
  • Kitchen splashbacks in horizontal stack bond
  • Commercial reception and corridor walls
  • Exterior walls, in line with the frost resistance result

How to Apply

  1. Plan the direction: choose vertical or horizontal stacking; keep any stagger within Dune’s 25% maximum offset.
  2. Make the wall sound: firm, level, dry, clean, under 2% moisture, with irregularities over 2mm levelled.
  3. Bed each tile: spread roughly 3mm of C2 cementitious adhesive, notch with a No. 3 trowel and position tiles before it skins. No dab fixing.
  4. Align with spacers: joints of 2mm at least, 3mm on plasterboard, with self-levelling spacers keeping long edges level.
  5. Grout the joints: spread grout with a rubber trowel into clean, dry joints and sponge off excess immediately, without abrasives.

Colour and Finish

Piedra’s grey shifts subtly across 21 faces, and the textured surface under the gloss reflects light at slightly different angles on each tile. Run vertically, that variation gives a wall a quiet, handmade rhythm; alternate between open boxes while fixing. Niebla and Noche pair well with it; other colours in the range include Arena, Lago and Musgo in gloss and Cotto Oscuro in matt.

Important Notes

  • Order the entire quantity from one batch, as shade varies between production runs.
  • Listed results are Dune’s published datasheet values, described as informative.
  • Check colour, finish and thickness before tiles go on the wall; Dune accepts no claims after installation.
  • Dune will not accept claims for tiles laid with an offset over 25%.
  • Piedra is Class 0 under UNE-EN 16165 Annex C, so it is not slip rated for wet floors, shower floors or ramps, nor for the pool steps and floors Dune keeps for Class 3.

Frequently Asked Questions

Can Dune Agadir Piedra subway tiles go on a shower wall?

Yes for walls, and Dune advises epoxy grout for better waterproofing in water areas. Its Class 0 slip result means it should not go on the shower floor.

Can Agadir Piedra be laid vertically?

Dune’s datasheet sets no laying direction, only a 25% maximum offset for staggered joints, so a vertical stack is a design choice to settle with your tiler.

What comes in a box of Agadir Piedra?

45 tiles covering 0.88 m², weighing 16.65 kg.

Key Features

  • Cool grey gloss on a crafted, irregular relief
  • Long 70x280mm (7x28cm) format, 9mm, with staggered offsets limited to 25%
  • Porcelain with 21 faces
  • Crazing resistance complies (UNE EN ISO 10545-11)
  • Frost test passed under UNE EN ISO 10545-12
  • 0.5% < E ≤ 3% water absorption; over 30 N/mm² breaking strength
  • Slip resistance Class 0 per UNE-EN 16165 Annex C
  • 45 pieces, 0.88 m² in each box

Additional information

Weight 16 kg
Dimensions 28 × 7 × 0.9 cm
Tile Location

, ,

Tile Material

Size

280mm x 70mm x 9mm

Surface

Gloss

Frequently asked questions

Can Dune Agadir Piedra subway tiles go on a shower wall?

Yes for walls, and Dune advises epoxy grout for better waterproofing in water areas. Its Class 0 slip result means it should not go on the shower floor.

Can Agadir Piedra be laid vertically?

Dune’s datasheet sets no laying direction, only a 25% maximum offset for staggered joints, so a vertical stack is a design choice to settle with your tiler.

What comes in a box of Agadir Piedra?

45 tiles covering 0.88 m², weighing 16.65 kg.

Videos

Agadir Piedra Gloss Subway Tile

Agadir Piedra Gloss Subway Tile

Agadir Piedra Gloss Subway Tile

Related Products

Added to cart

View cart