Description
Sigma KERA-FLEX Angle Grinder Attachment Art 38F13D
The Sigma KERA-FLEX Angle Grinder Attachment now allows for any make of 115mm angle grinder that is fitted
with an industry standard M14 threaded spindle to be attached to Sigma’s KERA-CUT System.
Simply mount a 115mm diamond blade to the head then thread in the angle grinder.
The angle-grinder is then secured to the KERA-FLEX arm using a strapping device.
Sliding the Sigma KERA-FLEX Angle Grinder Attachment along the cutting guide of the Kera-Cut
the “KERA-FLEX” enables tiles up to 25 mm thick to be saw-cut using either dry or wet
cutting techniques.
The trolley assembly runs on 3 highly durable wheels coated with a wear-resistant
Finish and double ball bearings.
The Sigma KERA-FLEX Angle Grinder Attachment provides for easy cutting depth adjustments, and
comes prepared for dust-extraction and water-assisted cutting (using the optional “Waterkit”).
It is possible to connect any grinder up to 1400W thanks to the universal M14 connection
and cutting discs of up to 125 mm in diameter can be used.
The Sigma KERA-FLEX Angle Grinder Attachment is supplied with a 115mm diameter turbo cutting disc.
CONVENIENT FOR THICK SLABS
When the KERA-FLEX Attachment is used in conjunction with the KERA-CUT it provides for
the cutting of ceramic materials with thicknesses up to 25 mm.
When using the KERA-CUT, simply remove the KERA-CUT scoring cart and replace it with
the KERA-FLEX.
CUTTING DEPTH STOP
Thanks to the depth stop, you won’t run the risk of cutting into the workbench, allowing
you to work with complete confidence.
WITH OR WITHOUT WATER?
Specially designed to work both ways!
Thanks to the “WATERKIT” it is possible to work with an adjustable water jet for maximum
finish quality and the limiting of tool wear.
Where dry cutting is required, the KERA-FLEX comes prepared for the attachment of dust
extraction equipment.
