STAIN PROOF Acidic Cleaner – 0.47 Litres

 

STAIN PROOF Acidic Cleaner is the ultimate acid for removing efflorescence, rust stains, grout haze and mortar mess on non-acid sensitive materials.
STAIN PROOF Acidic Cleaner, formerly known as EFF-ERAYZA™, is a new technology acid cleaner for removing efflorescence, rust stains, limescale, grout haze, mortar mess and fireplace soot.
Acidic Cleaner is very powerful and generally more effective to use than traditional industrial acids but does not produce noxious fumes, non-corrosive to metals (except for uncoated aluminium) and temporary contact does not burn skin.

 

TYPICAL APPLICATIONS
STAIN PROOF Acidic Cleaner is suitable for: a wide range of non-acid sensitive stones and other hard surfaces, including granite, slate, basalt, brick, ceramic and porcelain tile, terracotta. Indoors and outdoors on floors, walls, facades, showers, masonry and brickwork.

BENEFITS
STAIN PROOF Acidic Cleaner Removes efflorescence, grout haze, rust stains, mortar mess and hard water deposits.
For non-acid sensitive: stones, pavers, tiles, bricks and masonry.
STAIN PROOF Acidic Cleaner Is safer to use than traditional industrial acids such as muriatic and phosphoric, non-fuming.
STAIN PROOF Acidic Cleaner Is super concentrated – 1 quart makes approximately 4 gallons of powerful efflorescence remover.
STAIN PROOF Acidic Cleaner Chemically etches acid sensitive surfaces for added traction.

APPLICATIONS
STAIN PROOF Acidic Cleaner Is suitable for a range of non-acid sensitive stones and other hard surfaces including:
• Granite
• Slate
• Basalt
• Brick
• Terracotta
• Floors
• Walls
• Facades
• Showers
• Masonry
• Brickwork
• Ceramic & porcelain tile

HOW TO USE
1. TEST PRODUCT ON A SMALL AREA TO CHECK ACID SENSITIVITY BEFORE FULL APPLICATION.
2. If satisfied with test results, first sweep or vacuum all loose dust and dirt from the surface.
3. Apply when surface temperature is between 40 – 95 °F (5 – 35 °C). Pre-wet surface with water.
4. Pour, brush or spray mixed solution generously onto wetted surface and leave for up to 3 minutes.
5. Do not allow solution to dry on surface. Clean large areas in sections.
6. Rub with a white nylon scrub pad, or similar, to clean the surface.
7. Always neutralize the acid by dissolving 1 cup of STAIN-PROOFTM Alkaline Cleaner (or other pH base/alkaline cleaner) into a bucket of fresh water and pour it over the surface. Let it sit for approximately 3 minutes.
8. Rinse surface thoroughly several times with clean water using a mop or wet vacuum

STORAGE
Store Stain Proof Acidic Cleaner in a well-ventilated place. Keep cool. Do not freeze.

DISPOSAL
Dispose of contents in accordance with applicable local/national/regional/ international regulations.

COUNTRY OF MANUFACTURE
Stain Proof Acidic Cleaner Is made in the USA with globally sourced materials.

CONTENTS
Urea hydrochloride.

VOC CONTENT
VOC (Calculated): < 5g/L

PACK SIZE
32 fl OZ /.95 L | 141912

CAUTIONS

KEEP OUT OF REACH OF CHILDREN.

DANGER:
May be corrosive to metals.
Causes skin irritation.
Causes serious eye damage.
May cause respiratory irritation.

FIRST AID
If exposed or concerned get medical advice.
IF ON SKIN: Wash with plenty of soap and water.
IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.
If breathing has stopped give artificial respiration.
IF IN EYES:
Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do.
Continue rinsing.

IN CASE OF FIRE: Use alcohol resistant foam or normal protein foam for extinction.

TRANSPORT
SHIPPING NAME: DOT (Road) Not regulated for transport as dangerous goods.
DOT Remarks: Corrosive to Aluminium, Excepted per 49CFR 173.154(d)(1).
IATA and IMDG: UN3265, Corrosive liquid, acidic, organic, n.o.s. (Urea Hydrochloride), 8, III.