Description
SlipSolve Non Slip Treatment
Many people suffer serious injury as a result of a slip or trip. Reducing this unnecessary injury toll is a priority.
SlipSolve Non Slip Treatment is a heavy-duty exterior/interior invisible lasure (not a film) specially formulated to reduce the risk of slips. It provides a tough, clear, anti-slip impregnation that will not de-laminate on a variety of surfaces including: ceramic, concrete, marble, terrazzo, enamel, brick, slate, clay pavers, sandstone and many other surfaces.
SlipSolve also protects the surface from ingress of water, oil and other pollutants making the surfaces easier to clean, resistant to erosion and the build-up of dirt and grime.
SlipSolve is easily to apply by simply wetting the surface for 40 minutes and then mopping clean, so it is ready to walk on in literally minutes. It is a 1 part solution, is water based, eco-friendly and does not contain any harmful ingredients.
Whilst SlipSolve will enhance the safety of porcelain surfaces, all smooth floor surfaces regardless of treatment are potentially dangerous when proper care is not taken.
WHERE TO USE:
Factories
Commercial Areas
Nursing Homes
Entrance Halls
Gymnasiums
Swimming Pool Surrounds
Pedestrian Crossings
Bars
Restaurants
Kitchens
Shower Units
Bath Tubs
Anywhere that Floors are Slippery, especially when wet
GLOSS LEVEL:
Applies wet and dries invisible. On some surfaces the gloss level may be reduced marginally. It is highly recommended a trial area is treated prior to treating the entire surface. To achieve optimum safety, the reduction of gloss levels on some substrates will be necessary.
PREPARATION:
Clean surface to be treated with STICleaner to ensure the surface is free of oil, grease, dust or other contaminants.
APPLICATION:
- Remove any protective wax from substrate surface.
- Pour or spray the product onto clean and dry surface applying it with the assistance of a brush or low-pressure spray.
- Make sure the product stays present over the complete surface during the treatment.Add more product if necessary.
- Do not let the product dry or bead during the whole treatment time.
- After treatment, rinse carefully with water.
- The treated surface can be used immediately.
FOR CONCRETE, TERRAZO, TILES, MARBLE AND POLISHED GRANITE:
Use undiluted (allow to react for 40-60minutes).
FOR POLISHED PORCELAIN TILES:
Use SlipSolve Porcelain, specifically formulated for polished porcelain surfaces.
CLEAN UP:
With Water
