Environex Synergy Sealer
– 2, 10 and 20 Litres

Environex Synergy Sealer is a new generation penetrating liquid that consolidates, hardens and binds the surface of porous and friable masonry materials. Environex Synergy Sealer also possesses premium penetrating sealer properties to ensure maximum protection of the stone from permanent staining. Environex Synergy Sealer has been scientifically developed and laboratory tested against Australian Standards. Environex Synergy Sealer has been developed especially for use around all swimming pools to assist in prevention of salt attack and is warranted for a period of 2 years. The warranty does not apply to masonry that is semi submersed for long periods, ie on or below the water line in swimming pools.

SYNERGY is suitable for most porous internal and external stone and masonry surfaces.
SYNERGY will protect against grease, grime, mould and mildew.
SYNERGY is also available in spray cans suitable for stone bench tops, splash backs, showers, outdoor masonry furniture, statues, water features, pots, head stones etc.

APPLICATION

ALWAYS TEST PRODUCT ON A SMALL AREA FIRST.
Ensure surfaces to be treated are dry, clean and free from residue.
Apply the first coat of SYNERGY to the masonry via lambswool applicator, brush or a low pressure Viton sprayer.
It is ESPECIALLY IMPORTANT to apply SYNERGY to all surfaces including underneath the exposed pool coping.
Apply the second coat when the first coat is dry, generally between 1-4 hours depending on ambient conditions.
More coats may be required if the masonry is very porous.
Bench tops spray 2 – 3 coats as necessary and buff the final coat if required.
Not suitable for Bluestone.
Allow 7 days for curing.

COVERAGE

Approximately 10 square metres per litre, per coat. 2-3 coats are required depending on the porosity of the stone. More porous masonry requires more coats for adequate protection properties.
Note: The first coat will soak up more sealer per square metre than subsequent coats. Regardless two coats will average out as above. Actual coverage depends on the absorbency of the masonry. The denser the product the less sealer is required.

CLEANUP

Clean all equipment with Cyclone.
Maintenance:
Clean with REFRESH at 1:50 in warm water.
If harsh chemicals such as acids, degreasers, Jiff, Handy Andy etc. are used resealing maybe necessary as they can compromise the sealers.
Resealing may be necessary.

SAFETY

Read the Material Safety Data Sheet.
Use only in well-ventilated areas.
Use a positive pressure respirator if ventilation is inadequate.
Wear suitable solvent-resistant gloves, protective clothing, safety goggles and an organic vapour respirator during application.
Wash hands thoroughly.

PACKAGING

2, 10, 20 and 200 Litre containers.

IMPORTANT NOTICE TO CUSTOMER

Since the use of this product is beyond the control of either seller or manufacturer, their only obligation shall be to replace any quantity of product which is proven defective. They cannot assume any risk or liability in excess of the purchase price of the product itself, which does not include labour or any consequential damages resulting from the use of this product. Determining the suitability of this product for any intended use shall be solely the responsibility of the user.
ALWAYS TEST FIRST.