Dy-Mark Protech Electrical Parts Cleaner NF – 400g

General

Dy-Mark Protech Electrical Parts Cleaner NF is formulated as a cleaner/degreaser for the effective removal of grease, oil, wax, dirt and other contaminants from electrical motors and equipment. Dy-Mark Protech Electrical Parts Cleaner NF has no flash point, no fire point, is non corrosive, non staining, dries quickly and leaves no residue. Dy-Mark Protech Electrical Parts Cleaner NF does not contain carbon tetrachloride, silicones, CFC113, trichloroethylene or tetrachloroethylene.
Dy-Mark Protech Electrical Parts Cleaner NF is a Non-Flammable product.

Directions For Use

Recommended Uses:

• Generators, forklifts, electric motors, switches, plus controls, circuit breakers, coils, fuse holders, laboratory equipment, mechanical and electrical parts and other uses.
• It is advisable to test on a sample before use.
• Maybe harmful to certain plastics.
• Do not use on plastics such as Acrylic, ABS and Polycarbonate.
• For all precision instruments, check with manufacturer.

Preparation:

• De-activate and isolate equipment before use.
• Do not use on energised equipment.
• Shake can well.
• Shake can occasionally during use.

Application:

• 360° valve enables spraying in upright and inverted positions.
• Do not spray at 45° angle.
• Spray parts generously and allow to run off.
• Use extension tube for hard to reach areas.
• Dry with soft cloth or air dry.
• Allow product to dry completely and thoroughly.
• Repeat application if necessary.
• Vent the system before restoring power.

Technical Data

• Size: 400g Aerosol
• Colour: Clear
• Consistency:Liquid
• Propellant: Carbon Dioxide

Storage

• Store locked up
• Store in a well-ventilated place

Disposal

Pressurised container:

• Do not pierce or burn, even after use.
• Aerosol should be completely emptied prior to disposal.
• Dispose of contents/container according to regional regulations.

First Aid/Safety Information

Please refer to the Safety Data Sheet (SDS) before use. 
Safety data sheets are also available from the dymark website at www.dymark.com.au

Disclaimer

The information provided within this Technical Data Sheet is intended as a guide only. The performance of this product will depend on many factors outside the control of Dy-Mark; including surface preparation, surface-specific conditions, surface types, correct application and environmental conditions.
Dy-Mark recommends customers undertake their own risk assessment prior to use, to determine the suitability of the product for the particular use intended.
It is essential that a sample of the product be applied to the intended area of use to ensure it is acceptable in appearance and finish and that it performs on the specific surface.
For further information please contact the Dy-Mark Sales and Customer Support Centre on 1300 396 275.