Ardex Superflex WPM002 Undertile Membrane

20kg Part A and 20kg Part B

Ardex Superflex WPM002 (Superflex Bathroom and Balcony Two Part) is a tough, fast drying two component waterproofing membrane specifically designed for use under tiles. The product has been uniquely formulated with synthetic microfibres to increase its strength and eliminate the need for a separate reinforcement mat. Ardex WPM 002 is based on the most advanced acrylic polymer technology, and is totally resistant to re-emulsification.

ADVANTAGES

Rapid drying time
Two component undertile waterproofing membrane
Advanced acrylic – will not re-emulsify
Fibre reinforced – eliminates the need for reinforcing mat
Meets class III category for AS 4858 Wet Area Membranes
Low VOC content – meets Green Building Council of Australia
Green Star IEQ-13 requirements

DESCRIPTION

Ardex Superflex WPM002 is flexible, low in odour, and is fully compatible with polymer modified tile adhesives.
Ardex Superflex WPM002 is one of the fastest drying acrylic membranes on the market – normally ready to tile in 16–24 hours @ 23°C.

Ardex Superflex WPM002 meets the Green Building Council of Australia Green Star IEQ-13 requirements for Architectural Sealant when tested in accordance with SCAQMD Method 304-91 Determination of Volatile Organic Compounds (VOC) in Various Materials as referenced by South Coast Air Quality Management Division (SCAQMD) Rule 1168.

FEATURES/BENEFITS

• Fast drying Ardex Superflex WPM 002 can be tiled over in 16–24 hours, or 4 hours @ 23°C / 50% RH in non critical areas*.
• Fibre reinforced: Excellent strength, eliminates need for reinforcing mat.
• Flexible: Accommodates normal building movement.
• Advanced acrylic: Will not re-emulsify.
• Designed for tiling: Fully compatible with ARDEX tile system adhesives.
• Water based, low odour and easy cleaning for undertile waterproofing in shower recesses.
• Conforms to the requirements of AS/NZ 4858:2004 Wet Area Membranes.

*Critical areas include areas where the membrane is applied
over impermeable substances such as bond breakers
or incorporating reinforcement. Longer drying times are
necessary in these areas.

Max Thickness:
Total dry film thickness on floors (2 coats): 1.2mm
Total dry thickness on walls (2 coats): 0.8mm

Spread Rate:
40Kg Kit covers approx.:
Floors: 16m2 (2 coats) D.F.T – 1.2mm
Walls: 24m2 (2 coats) D.F.T – 0.8mm

Size: 40Kg Kit
Supplier Code: WPM002