Description
Litikol StyleGrout Tech Grey 3 – 3kg
GENERAL – Zero Efflorescence and Envoronmentally Sustainable!
Litikol StyleGrout Tech Grey 3 is a flexible, multipurpose cementitious grout for grouting joints up to 20 mm wide between ceramic and porcelain tiles, porcelain stoneware, slabs, mosaics and natural stones. Water-repellent and anti-efflorescence with high colour-fast properties, keeps the joint full and even. For interiors and exteriors.
ADVANTAGES AND FEATURES
- Litikol StyleGrout Tech Grey 3 has a very low volatile organic compound (VOC) emission rate. Complies with class EC1PLUS according to the EMICODE protocol and class A+ (Émission dans l’air intérieur – French Regulations)
- Complies with the requirements of class CG2WA according to EN 13888 and ISO 13007-3
- Plastic and fluid thixotropic mix
- Suitable for the grouting of materials installed on heating screeds
- Full, smooth and compact joint
- Short waiting times and easy cleaning
- Avoids the formation of efflorescence
- Stable and consistent colours
- Quickly develops high mechanical strength, setting to light foot traffic in just 4 hours
- Resistant to mould
- Ready for use: 24 hours
- Compensated shrinkage
- Maintains excellent workability over time, without any bothersome thickening
- High abrasion resistance
- Water-repellent
PACKAGING
- Litikol StyleGrout Tech Grey 3 is available in 3 kg bags (plus bulk-purchase boxes containing 6 x 3kg bags)
INTENDED USE FOR Litikol StyleGrout Tech Grey 3
Intended uses
- Interiors – exteriors
- Floors and walls
- Underfloor heating
- Façades
- Overlaying
- Terraces and balconies
- Residential, public, commercial building
- Indoor wet areas (bathrooms, shower enclosures) Tanks,swimming pools, fountains
SPA and Hammam Industrial floors
Suitable Materials
- Ceramic and porcelain tiles Single fired
- Double fired
- Terracotta – Clinker
- Marble – Granite – Stone Natural stones
- Porcelain stoneware
- Ceramic and vitreous mosaics Thin laminated stoneware slabs Large sizes
- Slabs 320×160 cm
- Recomposed stone made with resin or cement
WARNINGS
- Spread the product at temperatures between +5°C and +35°C inclusive
- Before application, make sure that the adhesive used to install the ceramics or mosaics has completely dried
- Change the cleaning water frequently
- Change the sponge when it is impregnated with product
- Protect against direct sunlight or strong air currents for the first 12 hours after application
- Respect the mix ratio
- Do not use the product on damp surfaces or surfaces subject to rising damp
- Do not add lime, cement or other foreign materials to the product
- Do not cover the grouted surface with sheets or other materials to prevent condensation from forming that could cause surface carbonation of the product resulting in an uneven colour. Wait at least 24-48 hours, depending on the temperature, before protecting the surface with breathable materials.
- Mixes with different amounts of water may affect the final colouring.
- Certain types of tiles (e.g., polished porcelain stoneware) or natural stones, have micro-porosities and surface roughness that can cause surface staining and make cleaning very difficult.
- In these cases, it is advisable to perform a spot test and in any case, avoid using grouts with contrasting or very dark colours.
- Do not use the product for widths greater than 20 mm
- Do not use the product for applications not stated in this technical sheet
If in doubt, contact the Litokol S.p.A Technical Help Service.
