Dy-Mark Steadfast Stock Marking Paint – 325g

General

Dy-Mark Steadfast Stock Marking Paint is a long lasting marker ideal for identifying stock by colour coding. The fully scourable marker complies with the Australian Standard “Scourable Branding Substances for Greasy Wool” (AS4054-1992).
APVMA Approval No: 53269/0900

Directions For Use

Suitable for use on:

• Wool.

Code of Practice

• The use of Stock Markers should be confined to the head of the animal (as outlined in the AWEX Code of Practice for Preparation of Australian Wool Clips 2016-2018). Avoid excessive application as this may result in discolourisation after scouring.

Application:

• SHAKE can for at least 45 seconds AFTER the mixing ball begins to rattle. Shake the can occasionally during use. Hold the can upright approximately 20-30cm from the surface and spray for less than 1 second.

Technical Data

• Size: 325g Aerosol
• Colours: Red, Blue, Green, Orange and Violet
• Finish: Matt
• Consistency: Liquid
• Propellant:DME

Storage

• Store locked up.
• Protect from sunlight.
• Do not expose to temperatures exceeding 50ºC
• Do not store in vehicles under hot conditions
• Store in a well-ventilated place.

Disposal

Pressurised container:

• Do not pierce or burn, even after use.
• Aerosol should be completely emptied prior to disposal.
• Dispose of contents/container according to regional regulations.

First Aid/Safety Information

Please refer to the Safety Data Sheet (SDS) before use. 
Safety data sheets are also available from the dymark website at www.dymark.com.au
call a POISON CENTRE:Australia 13 11 26, New Zealand 0800 764 766 or doctor/physician if you feel unwell. Intentional misuse by deliberately inhaling contents can be harmful or fatal. KEEP OUT OF REACH OF CHILDREN

Disclaimer

The information provided within this Technical Data Sheet is intended as a guide only. The performance of this product will depend on many factors outside the control of Dy-Mark; including surface preparation, surface-specific conditions, surface types, correct application and environmental conditions.
Dy-Mark recommends customers undertake their own risk assessment prior to use, to determine the suitability of the product for the particular use intended.
It is essential that a sample of the product be applied to the intended area of use to ensure it is acceptable in appearance and finish and that it performs on the specific surface.
For further information please contact the Dy-Mark Sales and Customer Support Centre on 1300 396 275.