Dy-Mark Spray and Mark

Description

Dy-Mark Spray and Mark – 350g

General

Dy-Mark Spray and Mark is a Premium marking out paint designed for a range of applications including; construction, landscaping, civil works and surveying. Dy-Mark Spray and Mark is suitable for use with the Long Arm Handle and the 2-Wheel Spot Marking Handle, also available from Dy-Mark.

Directions For Use

Suitable Surfaces:

• Concrete, bitumen and timber.

Ideal Application Temperature:

• Between -10ºC and 30ºC.
• Avoid use in windy conditions.

Before Spraying:

• Shake can for at least 45 seconds AFTER the mixing ball begins to rattle.
• Shake can occasionally during use.

Application:

• Hold can in the inverted position (upside down), approximately 10-15cm from the surface Spray width can be adjusted by moving closer or further from the surface to be sprayed.

Coverage:

• Will produce 200+ ‘X’ marks, up to 120 lineal metres (depending on the surface and colour used).

Drying Time:

• Touch dry in 5 minutes (@25ºC)
• Drying time will be slower in cold and humid conditions, in the absence of ventilation or where heavy film build is applied.

After Spraying:

• Prevent blocking by holding the can upright and spraying until only clear gas escapes. Also wipe spray tip of the nozzle clean of paint. Clean up wetpaint with Acetone or General Purpose Thinner.

Caution:

• Painted surfaces may become slippery when wet. Refer to disclaimer in the TDS page 3.

Technical Data

• Size: 300ml Aerosol
• Colour: 8 Standard colours and 8 Fluoro colours
• Finish: Matt
• Consistency: Liquid
• Propellant:
  1.      Hydrocarbon / Dimethyl Ether
  2.      Post November 2020: Hydrocarbon

Storage

• Store locked up.
• Protect from sunlight.
• Do not expose to temperatures exceeding 50ºC.
• Store in a well-ventilated place.

Disposal

Pressurised container:

• Do not pierce or burn, even after use.
• Aerosol should be completely emptied prior to disposal.
• Dispose of contents/container according to regional regulations.

First Aid/Safety Information

Please refer to the Safety Data Sheet (SDS) before use. 
To view the correct SDS, please refer the back of the can under the section “CONTAINS” to confirm which formulation is used and to match up the details with Section 3 of the SDS which contains the formulation.
Safety data sheets are also available from the dymark website at www.dymark.com.au
Call a POISON CENTRE: Australia 13 11 26 or doctor/physician if you feel unwell.
Intentional misuse by deliberately inhaling contents can be harmful or fatal.
KEEP OUT OF REACH OF CHILDREN.