Description
Dy-Mark Protech Penetrating Oil – 400g
General
Dy-Mark Protech Penetrating Oil is a high speed penetrant and lubricant that quickly penetrates rusted and seized metal parts. Dy-Mark Protech Penetrating Oil has a low viscosity that creeps into cracks, seams, threads and joints, loosening and freeing them instantly.
Incorporates patented 2-way actuator with locking tab. Uses a 360° valve for upright inverted applications.
Directions For Use
Recommended Uses::
- Taps, nuts & bolts, rusted bolts, padlocks, pins, screws, bushings, clips, hinges, locks, washers and other rusted surfaces.
Application:
- De-activate and isolate equipment before use.
- Shake can well.
- Shake can occasionally during use.
- 360 degree valve enables spraying in upright and inverted positions.
- Do not spray at 45 degree angle.
- Spray liberal coating directly on to corroded surfaces, saturating the problem area.
- Use extension tube for hard to reach areas.
- Repeat application if necessary.
- When finished spraying, actuator can be set in lock position to prevent accidental actuation.
Technical Data
- Size: 400g Aerosol
- Colour: Light Golden yellow
- Consistency:Liquid
- Propellant: Carbon Dioxide
Storage
- Protect from sunlight.
- Do not expose to temperatures exceeding 50ºC
Disposal
Pressurised container:
- Do not pierce or burn, even after use.
- Aerosol should be completely emptied prior to disposal.
- Dispose of contents/container according to regional regulations.
First Aid/Safety Information
Please refer to the Safety Data Sheet (SDS) before use.
Safety data sheets are also available from the dymark website at www.dymark.com.au
Disclaimer
The information provided within this Technical Data Sheet is intended as a guide only. The performance of this product will depend on many factors outside the control of Dy-Mark; including surface preparation, surface-specific conditions, surface types, correct application and environmental conditions.
Dy-Mark recommends customers undertake their own risk assessment prior to use, to determine the suitability of the product for the particular use intended.
It is essential that a sample of the product be applied to the intended area of use to ensure it is acceptable in appearance and finish and that it performs on the specific surface.
For further information please contact the Dy-Mark Sales and Customer Support Centre on 1300 396 275.
