Dy-Mark Protech Lanolin Lubricant – 400g

General

Dy-Mark Protech Lanolin Lubricant is a safe and environmentally friendly product. Lanolin (wool grease) is a natural substance derived from sheeps wool. Dy-Mark Protech Lanolin Lubricant is non-toxic, biodegradable, non-evaporative and provides long lasting lubrication and corrosion protection. Dy-Mark Protech Lanolin Lubricant is moisture, salt and acid resistant without harming metal, plastics, paints, fibreglass, rubber or neoprene seals. Suitable for use in marine, agricultural, engineering and electrical applications. Silicone free formula.

Directions For Use

Recommended Uses:

• Outboard motors, saw blades, hinges, battery terminals, Plus conveyers, irrigation equipment, farm machinery, rollers, chains, gears, locks, circuit boards, connectors, fishing and sporting equipment and other uses.

Application:

• Do not use on energised equipment.
• Shake can for at least 45 seconds AFTER the mixing ball begins to rattle.
• Shake can occasionally during use.
• Spray can in UPRIGHT position only.
• Spray onto clean dry surfaces.
• Spray light even film directly on surface to be lubricated and protected.
• After application Lanolin lubricant may be polished with a dry cloth if required.
• Use extension tube for hard to reach areas.
• Repeat application if necessary.
• Vent the system before restoring power.
• Do not use on Polycarbonate.
• Not for use on sensitive electronics.

Technical Data

• Size: 400g Aerosol
• Colour: Light Brown
• Consistency:Liquid
• Propellant: Hydrocarbon/DME

Storage

• Protect from sunlight.
• Do not expose to temperatures exceeding 50ºC

Disposal

Pressurised container:

• Do not pierce or burn, even after use.
• Aerosol should be completely emptied prior to disposal.
• Dispose of contents/container according to regional regulations.

First Aid/Safety Information

Please refer to the Safety Data Sheet (SDS) before use. 
Safety data sheets are also available from the dymark website at www.dymark.com.au

Disclaimer

The information provided within this Technical Data Sheet is intended as a guide only. The performance of this product will depend on many factors outside the control of Dy-Mark; including surface preparation, surface-specific conditions, surface types, correct application and environmental conditions.
Dy-Mark recommends customers undertake their own risk assessment prior to use, to determine the suitability of the product for the particular use intended.
It is essential that a sample of the product be applied to the intended area of use to ensure it is acceptable in appearance and finish and that it performs on the specific surface.
For further information please contact the Dy-Mark Sales and Customer Support Centre on 1300 396 275.