Description
Dy-Mark Protech High Pressure Freeze Spray – 300g
General
Dy-Mark Protech High Pressure Freeze Spray is an efficient cooling system that instantly freezes surfaces to -50 degrees C. Its powerful blast of propellant instantly chills suspect electrical and electronic components. Dy-Mark Protech High Pressure Freeze Spray is non-flammable, plastic safe, leaves no residue and is non-abrasive. Is also ideal for removing chewing-gum or sweets from fabrics.
Directions For Use
Recommended Uses::
- Thermostats, computers, thermometers, circuit boards, laboratory and precision electronic equipment, office equipment and more uses.
- DO NOT SPRAY ON SKIN.
- Can will dispense freezing liquid which can cause frostbite on exposed skin.
- Shake can well.
Application:
- Spray can in UPRIGHT position only.
- Spray onto surface from a distance of 10-15cms.
- Spray in short bursts.
- Use extension tube for hard to reach areas.
Technical Data
- Size: 300g Aerosol
- Colour: Clear
- Consistency:Colourless Liquid
- Propellant: HFC134A (1,1,1,2 – Tetra fluoroethane)/li>
Storage
- Protect from sunlight.
- Do not expose to temperatures exceeding 50ºC
Disposal
Pressurised container:
- Do not pierce or burn, even after use.
- Aerosol should be completely emptied prior to disposal.
- Dispose of contents/container according to regional regulations.
First Aid/Safety Information
Please refer to the Safety Data Sheet (SDS) before use.
Safety data sheets are also available from the dymark website at www.dymark.com.au
Disclaimer
The information provided within this Technical Data Sheet is intended as a guide only. The performance of this product will depend on many factors outside the control of Dy-Mark; including surface preparation, surface-specific conditions, surface types, correct application and environmental conditions.
Dy-Mark recommends customers undertake their own risk assessment prior to use, to determine the suitability of the product for the particular use intended.
It is essential that a sample of the product be applied to the intended area of use to ensure it is acceptable in appearance and finish and that it performs on the specific surface.
For further information please contact the Dy-Mark Sales and Customer Support Centre on 1300 396 275.
