Dy-Mark Protech High Pressure Air Duster – 235g

General

Dy-Mark Protech High Pressure Air Duster is a dry, multi-purpose cleaner for the safe removal of dust and lint from all delicate precision equipment. Dy-Mark Protech High Pressure Air Duster has a powerful burst of compressed gas which will remove dirt without any abrasion risk. It is non-corrosive and leaves no residue or condensation. Ideal for off-site servicing when compressed air not available.

Directions For Use

Recommended Uses::

• Circuit boards, precision electronic equipment, keyboards, cameras, telephones, printers, videos and other uses.

Ideal Application:

• De-activate and isolate equipment before use.
• Do not use on Energised equipment.
• Spray can in UPRIGHT position only.
• Do not shake can during use.
• Spray can in short bursts.
• Spray onto surface from a distance of 15-20cms.
• Use extension tube for hard to reach areas.

Technical Data

• Size: 235g Aerosol
• Colours: Clear
• Consistency:Colourless liquefied gas
• Propellant: HFC 152A (1,1 – Difluoroethane

Storage

• Protect from sunlight.
• Do not expose to temperatures exceeding 50ºC

Disposal

Pressurised container:

• Do not pierce or burn, even after use.
• Aerosol should be completely emptied prior to disposal.
• Dispose of contents/container according to regional regulations.

First Aid/Safety Information

Please refer to the Safety Data Sheet (SDS) before use. 
Safety data sheets are also available from the dymark website at www.dymark.com.au

Disclaimer

The information provided within this Technical Data Sheet is intended as a guide only. The performance of this product will depend on many factors outside the control of Dy-Mark; including surface preparation, surface-specific conditions, surface types, correct application and environmental conditions.
Dy-Mark recommends customers undertake their own risk assessment prior to use, to determine the suitability of the product for the particular use intended.
It is essential that a sample of the product be applied to the intended area of use to ensure it is acceptable in appearance and finish and that it performs on the specific surface.
For further information please contact the Dy-Mark Sales and Customer Support Centre on 1300 396 275.