Description
Dy-Mark Protech Heavy Duty Degreaser – 400g
General
Dy-Mark Protech Heavy Duty Degreaser has been specially formulated to provide effective and fast removal of tough grease, oil, dirt and grime. Dy-Mark Protech Heavy Duty Degreaser delivers a concentrated jet which works immediately on contact and is easy to rinse off with water. For use on tools, machinery and equipment.
Uses a 360° valve for upright inverted applications.
Directions For Use
Recommended Uses::
- Engines, Machinery, Lifts and Hoists, tools, industrial equipment, farm equipment, Lawn mowers, garage floors and other uses.
Application:
- Shake can well.
- Shake can occasionally during use.
- 360 degree valve enables spraying in upright and inverted positions.
- Do not spray at 45 degree angle.
- Hold can 20 – 25cms from surface.
- Spray liberal coating directly on to surface, saturating the problem area.
- Allow to penetrate for 5 – 10 minutes.
- Hose off with pressure.
- Heavy or thick deposits may have to be loosened with a scraper or brush.
- Repeat application if necessary.
- Prolonged exposure to painted metal surfaces not recommended.
Technical Data
- Size: 400g Aerosol
- Colour: Light Yellow
- Consistency:Liquid
- Propellant: Carbon Dioxide
Storage
- Protect from sunlight.
- Do not expose to temperatures exceeding 50ºC
Disposal
Pressurised container:
- Do not pierce or burn, even after use.
- Aerosol should be completely emptied prior to disposal.
- Dispose of contents/container according to regional regulations.
First Aid/Safety Information
Please refer to the Safety Data Sheet (SDS) before use.
Safety data sheets are also available from the dymark website at www.dymark.com.au
Disclaimer
The information provided within this Technical Data Sheet is intended as a guide only. The performance of this product will depend on many factors outside the control of Dy-Mark; including surface preparation, surface-specific conditions, surface types, correct application and environmental conditions.
Dy-Mark recommends customers undertake their own risk assessment prior to use, to determine the suitability of the product for the particular use intended.
It is essential that a sample of the product be applied to the intended area of use to ensure it is acceptable in appearance and finish and that it performs on the specific surface.
For further information please contact the Dy-Mark Sales and Customer Support Centre on 1300 396 275.
