Dy-Mark Mine Marking Paint – 350g

General

Dy-Mark Mine Marking Paint is a marking out paint specially formulated for above / below ground areas (not recommended for underground coal mines – use Mine Marking Non-Flammable). Dy-Mark Mine Marking Paint utilizes a 360 degree valve and is available with two nozzle options for upright/ inverted or horizontal spray applications. Horizontal features a standard paint nozzle (for where the main application is side walls) whilst vertical is designed for marking ceilings and floors. For high ceilings and hard to reach areas, use of the Dy-Mark Mine Marking height extension handle is recommended (suitable for use with both options). Applications include marking out ore zones in grading control, pit walls and server grid layouts.

Directions For Use

Suitable Surfaces:

• Rock, dirt and gravel.

Ideal Application Temperature:

• Between -10ºC and 40ºC.

Before Spraying:

• Shake can for at least 45 seconds AFTER the mixing ball begins to rattle.
• Shake can occasionally during use.

Application:

• Hold the can UPRIGHT or in the INVERTED position and spray with the nozzle approximately 20-25cm from the surface. Adjust the spray width by moving closer or further away from the surface to be sprayed.

Coverage:

• Approximately 2-4m2 per can (depending on the surface.

Drying Time:

• 3 minutes (@25ºC)

Caution:

• Painted surfaces may become slippery when wet. Refer to disclaimer on page 3.

Technical Data

• Size: 400g Aerosol
• Colour: 7 Standard and 6 Fluorescent colours
• Finish: Matt
• Consistency:Liquid
• Propellant:Dimethyl Eter / Hydroarbon

Storage

• Store locked up.
• Protect from sunlight.
• Do not expose to temperatures exceeding 50ºC/122ºC.
• Store in a well-ventilated place.

Disposal

Pressurised container:

• Do not pierce or burn, even after use.
• Aerosol should be completely emptied prior to disposal.
• Dispose of contents/container according to regional regulations.

First Aid/Safety Information

Please refer to the Safety Data Sheet (SDS) before use. 
To view the correct SDS, please refer the back of the can under the section “CONTAINS” to confirm which formulation is used and to match up the details with Section 3 of the SDS which contains the formulation.
Safety data sheets are also available from the dymark website at www.dymark.com.au
Call a POISON CENTRE: Australia 13 11 26, New Zealand 0800 764 766 or doctor/physician if you feel unwell. Intentional misuse by deliberately inhaling contents can be harmful or fatal.
KEEP OUT OF REACH OF CHILDREN.