Description
Ardex FG 8 Grout – 20kg
GENERAL
Highly Versatile Flexible Coloured Grout
Excellent workability – easy to apply and clean off
Strong uniform colour – reduces efflorescence
Smooth finish, flush joints – reduces trapped dirt
Polymer fortified – reduces likelihood of cracking
Mould resistant & water repellent – improves hygiene and appearance Grout to 8mm wide – more versatile
Extremely low VOC meets Green Building Council of Australia Green Star IEQ-13 requirements
Available in a wide range of coloursA smooth, flexible cement-based grout with improved colour integrity. ARDEX FG 8 is suitable for tile joints 1-8mm wide and is exceptionally easy to use on walls and floors.
DESCRIPTION
A smooth, flexible cement-based grout with improved colour integrity, ARDEX FG 8 Grout can be used for tile joints 1mm to 8mm wide, on walls and floors. It contains ARDEX Grout Shield to combat mould growth. Improved workability helps ensure flush joints, which is most noticeable with rectified edged tiles. ARDEX FG 8 Grout is available in a range of designer colours, and is suitable for grouting indoors and out.
FOR GROUTING (TILE TYPES)
Porcelain, ceramic tiles, terrazzo, slate, quarry tiles, glass and moisture insensitive natural stones.
PREPARATION
Ensure joints are clean and free from dust, excess adhesive and bedding mortar. Do not grout until the adhesive has set firmly. All ‘spacers’ must be removed from joints. Prior to grouting, it is advisable to check ease of cleaning with tiles that have a textured or matt surface.
MIXING
ARDEX FG 8 powder is added to clean water in a clean container whilst stirring thoroughly to give a lump free, paste like, creamy mortar. A 20kg bag of ARDEX FG 8 requires approximately 4.2 litres of water.
For swimming pools and timber floors, first dilute ARDEX Grout Booster with water (80% Booster: 20% water). Then mix 4.4L of diluted ARDEX Grout Booster per 20kg powder.The pot life of the mixed mortar is approximately 1 hour at 23°C and 50% relative humidity.
PACKAGING
ARDEX FG 8 is packed in poly bags and polylined paper sacks – net weight 1.5kg, 5kg and 20kg.
COLOURS
Please visit www.ardexaustralia.com for full range of colours.
SHELF LIFE
ARDEX FG 8 has a shelf life of 12 months for 20kg and 24 months for 1.5kg and 5kg, when stored in the original, unopened packaging, in a dry place at 23oC and 50% relative humidity.
Pay attention to the following:
Do not use ARDEX FG 8 for chemical resistant joints, use ARDEX epoxy grouts.
The likelihood of colour shade and efflorescence are reduced, however certain site conditions, finishing techniques and uneven drying conditions may cause this to persist. Certain types of tile may be prone to surface discoloration, e.g. some moisture sensitive natural stones or tiles with absorbent or textured surfaces. Porous face tiles e.g. terracotta, should be sealed prior to grouting to prevent staining.
In swimming pool applications, colours may bleach over time. Use ARDEX FG 8 White (200) mixed with diluted ARDEX Grout Booster. Full cure and ready for chemicals after 21 days. For public pools ARDEX epoxy grouts are recommended.
For expansion or movement joints, use ARDEX silicone sealant. Due to the varying degrees of movement inherent in timber floors, it is recommended that ARDEX FG 8 be mixed with diluted ARDEX Grout Booster.
Before any substrate preparation, installation or finishing methods relating to ARDEX product are undertaken, please be aware of any potential risks and use appropriate PPE (personal protective equipment). This may involve contacting substrate manufacturers for Safety Data Sheets.
QUALITY PRODUCT
ARDEX FG 8 is manufactured and tested to ARDEX procedures which are maintained in accordance with Quality System Standard ISO 9001. For further material safety data, consult the latest Safety Data Sheet.
SAFETY DATA
This product may cause irritation and an allergic reaction to the SKIN.
It may cause serious eye injury and irritation to the RESPIRATORY system.
In case of contact with the EYES rinse with running water until advised to stop by the Poisons Information Centre or a doctor, or for at least 15 minutes.
Wear protective gloves, clothing, eye and face protection.
AVOID INHALING dust/ fumes/gas/mist/vapours/spray.
Ensure adequate VENTILATION during mixing and application.
Suspected of causing GENETIC DEFECTS.
Store locked up.
Check with your local Council regarding the disposal of contents, dispose of packaging thoughtfully
and recycle where possible.
KEEP OUT OF THE REACH OF CHILDREN
Call the Poisons Information Centre on 131 126 (AUS) and 0800 764 766 (NZ) or call a doctor if you feel unwell. Additional information is in the Safety Data Sheet (SDS) at www.ardexaustralia.com
TECHNICAL DATA
Colour: Per attached pdf and Product image.
Mixing Ratio: Approx.4.2 litres water per 20kg powder
Application Properties at 23ºC and 50% RH
Pot life: 1 hour
Drying Time: 24 hours, Drying time before sealing is 7 days.
Underfloor Heating: Yes
Application Temperature: 10°C to 35°C
Mechanical Properties (ISO 13007)
Compression Strength 28 days: >20 MPa
Flexural strength, 28 days: ≥4MPa
Classification: CG2W
