Soudal Water Resistant PVA Wood Glue

Soudal Water Resistant PVA Wood Glue is a ready to use, fast drying, PVA-based adhesive with superior water resistance.

Properties
Soudal Water Resistant PVA Wood Glue has the following
• Easy to tool
• Transparent after drying
• High end strength
• Fast drying time
• Resistant to high temperatures

Applications
Soudal Water Resistant PVA Wood Glue is suitable for the following applications:
• Interior applications with frequent short-term exposure of the bonds to running or condensed water.
• Interior applications which are exposed to high relative humidity.
• Exterior applications which are not exposed to weather factors.
• Manufacturing of door and window frames that need to meet class D3 according to EN204.
• Bonding of wood, board, chipboard, veneer.
• Mounting of soft wood.
• Construction bonding such as mortise and tenon joints, punches, etc.
• Stationary edge-banding with veneers, plastic laminates and solid wood strips.
• Surface-bonding of decor-finish film, HPL and CPL to chipboard, MDF and plywood.
• Bonding joints in boards and block-bonding of softwood, hardwood and chipboard.

Packaging
Colour: white
Packaging: 250ml, 500ml, 1 Litre and 5 Litres

Shelf life
Soudal Water Resistant PVA Wood Glue has a shelf life of at least 12 months in unopened packaging kept in a dry storage place at temperatures between +5°C and +25°C.

Application Method:

Application method:
Apply Soudal Water Resistant PVA Wood Glue with a notched trowel, brush or machine on one of the materials to be bonded. Join the parts together and clamp for 1 to 2 hours.

Pressing Times:
If applicable. Curing time depends strongly on the used kind of wood, temperature, amount of adhesive and the porosity of the materials to be bonded.
Minimum pressing times High-frequency bonding with longitudinal heating > 15 sec. and Dekor-finish 5 – 10 sec. Minimum pressing times assembly bondings: 8 – 15 min.
Minimum pressing times bonding joints and block bonding: 10 – 15 min. Surface bonding of HPL/CPLin short cycle presses at 70°C: to plywood approx. 90 sec. and to chipboard approx. 45 sec.

Cleaning:
Before curing, Soudal Water Resistant PVA Wood Glue can be removed with water from substrates and tools. Cured Trade Water Resistant PVA Adhesive can only be removed mechanically.

Repair:
With the same material

Substrates:

Substrates:
Many non-porous and porous substrates like wood, carton, laminate, etc…

Nature:
The to be bonded materials should be flat and well fitting as well as clean, dry and free of dust and grease.

Surface preparation:
Slightly grinding smooth non-porous surfaces can improve the adhesion.
We recommend a preliminary compatibility test.

Health and Safety Recommendations
Take the usual labour hygiene into account.

Remarks:
• When bonding certain woods such as beech and cherry discoloration may occur because of the variety of composition and pretreatment.
• Do not dilute the adhesive.
Consult label and material safety data sheet for more information.