Soudal 2C Two Pack Adhesive

2C Adhesive is a two pack system consisting of a high viscosity cyanoacrylate adhesive and an aerosol activator.

Features & Benefits
Soudal 2C Two Pack Adhesive has the following benefits:
• High bond strength
• Very fast bonding
• Suitable for use on vertical surfaces as it will not drip or slump.

Applications
Soudal 2C Two Pack Adhesive has the following applications:
• Bonding of wooden mitre joints
• Fixing and repairing wooden parts
• Suitable for the fast bonding of e.g. MDF, plastics, metal, timber, porcelain, cork, leather, ceramics, cardboard, paper and rubber.

Packaging
Colour: transparent
Packaging: set of 50g adhesive and 200mL activator, 100g adhesive and 400mL activator

Shelf life
Soudal 2C Two Pack Adhesive has a shelf life of at least 12 months in unopened packaging in a dry storage place at temperatures between +5°C and +25°C. Protect against frost.

Application method

Application method:
Spray one surface with activator.
Apply the adhesive drop by drop to the other surface.
Bring materials together, position immediately and press firmly for at least 1 minute.
Reseal adhesive bottle tightly immediately after use.

Cleaning:
Uncured adhesive can be removed from substrates and tools with adhesive remover 90A.
Cured adhesive can only be removed mechanically.

Repair
With the same material

Substrates:

Substrates:
Most surfaces, both porous and non-porous.
Close-fitting surfaces, both porous and non-porous.
The surfaces need to be smooth and have a perfectly fitting contact area.

Nature:
Clean, dry, free of dust and grease.

Surface preparation:
No pretreatment required.
We recommend a preliminary adhesion test on every surface.

Health and Safety Recommendations
Take the usual labour hygiene into account.
Take care not to have glue between fingers or eyelids.
2C Adhesive may cause serious eye damage.
Keep out of reach of children.
Protect activator from sources of ignition.
Consult label and material safety data sheet for more information.

Remarks
• After using Soudal 2C Two Pack Adhesive, clean nozzle and tube with a needle and close the cap.
• Soudal 2C Two Pack Adhesive can be used without activator but will cure much slower.