Sika SikaQuick-2500 Rapid Set Repair Mortar

Sika SikaQuick-2500 Rapid Set Repair Mortar is a 1-part, cementitious, very rapid hardening, early strength gain concrete repair material.

Uses of Sika SikaQuick-2500 Rapid Set Repair Mortar

▪ On, above and below grade on concrete
▪ Highway overlays and repairs
▪ Structural repair material for concrete roadways, parking structures, bridges, dams and ramps
▪ Full depth patching repairs
▪ Economical patching material for horizontal repairs of concrete and mortar

Features of Sika SikaQuick-2500 Rapid Set Repair Mortar

▪ Very rapid hardening as defined by ASTM C-928
▪ Epoxy coatings can be applied as early as 4 hours
▪ Freeze / thaw resistant
▪ Easy to mix and apply – labor saving
▪ High early strength
▪ Fast setting
▪ Open to foot traffic in 45 minutes
▪ Open to vehicle traffic in 1 hour (at 23 °C)
▪ Not a vapour barrier
▪ Can be placed up to 150mm

Product Information

Composition
Cement, selected aggregates and special additives

Packaging
20kg Bag – 48 bags per pallet

Shelf Life
12 months from date of production

Storage Conditions
Product must be stored in original, unopened and undamaged sealed pack- aging in dry conditions at temperatures between 4°C – 35°C. Always refer to packaging.

Appearance and Colour
Grey Powder

Technical Information

Compressive Strength
1 hour ~ 13MPa
2 hours ~ 20MPa
1 day ~ 35MPa
7 days ~ 65MPa
28 day ~ 80MPa

Tensile Strength in Flexure
1 day > 5.5MPa
7 days > 6.9MPa
28 days > 7.6MPa

Application Information

Mixing Ratio
2.1 – 2.4 Litres of water per 20Kg Bag

Fresh Mortar Density
2200Kg/m3

Yield
10 Litres per 20Kg Bag

Layer Thickness
Minimum 5mm
Maximum 150mm

Ambient Air Temperature
7º Minimum

Substrate Temperature
7º Minimum

Pot Life
Approximately 15 minutes after adding powder to the water

Initial Set Time
~ 15 – 20 minutes at 23 °C / 50 % r.h.

Final Set Time
~ 25 – 30 minutes at 23 °C / 50 % r.h.

Important Considerations

▪ Apply only to sound, prepared substrate.
▪ Avoid application in direct sun and/or strong winds.
▪ Do not feather edge.
▪ Use only potable water.
▪ Variations in aggregates may produce differences in
strengths from the typical values stated in Product Data Sheet.