Applied in combination with suitable materials from Sikafloor®, SikaBond®, Sikadur®, SikaTite®, SikaTile® & Davco®ranges.
▪ Underlayment for Commercial & Domestic floor coverings
▪ Suitable to be applied prior to Sikafloor® epoxy or polyurethane colour coatings, in light to medium traffic areas (retail, commercial & car parks)
▪ Levelling of new or old concrete substrates
▪ Suitable for applications over concrete internally and externally, refer to product limitations in this document.

Features Sika Sikafloor Level Ultra

▪ Fiber reinforced
▪ Very Low VOC
▪ Green star certified
▪ High flexural strength
▪ High compressive strength
▪ Underfloor heating suitable
▪ Fast drying – Install tiles after 5-6hrs & moisture sensitive flooring after 7-8hrs @ 23°C
▪ Highly fluid with great self-healing properties
▪ Simply mix & apply – No slaking or re-mixing required
▪ Pump or manual application

Certificates and Test Reports

▪ Green Star (VOC-SCQMD Rule 1168)

Packaging

20kg Bag – 48 bags per pallet

Shelf Life

Unopened bags can be stored for up to 12 months in a cool, dry and weatherproof environment.

Storage Conditions

Bags must be stored off the floor. Avoid sitting bags in direct sunlight prior to application.

Appearance and Colour

Grey Powder

VOC Content

1 Gram per Litre

Compressive Strength

1 day cure – 15MPa -17MPa
28 day cure – 30MPa – 33MPa

Flexural Strength

28 day cure – 7MPa – 8MPa

Yield

12 Litres – 4m2 @ 3mm thickness

Layer Thickness

1 – 50mm in a single application

Ambient Air Temperature

10°C – 35°C

Mixing Ratio

4.8 – 5 Litres of clean, cool water

Pot Life

20 minutes @ 23°C

Initial Set Time

75 minutes @ 23°C

Ready for Use

Allow 7 – 8 hours at 23°C prior to installing moisture sensitive flooring. Allow 5 – 6 hours at 23°C prior to installing tiles or stone.
Note:
1. Drying is dependent on thickness of application, temperature, air flow & relative humidity. Increased air flow will help with drying speeds in cooler temperatures.
2. Testing moisture content before applying flooring is recommended 3. Prior to applying Sikafloor® coatings, suitable mechanical preparation over Sikafloor® Level Ultra is recommended to create a surface profile improving bond strength. Preparation may include sanding, grinding or shot blasting for example. This process is then followed by a thorough clean (broom + vacuum) before Sikafloor® coatings are applied.