Sika Sikafloor 4020 FiberLevel

20Kg Bag

Sika Sikafloor 4020 FiberLevel is a rapid drying, fiber reinforced self-levelling compound

DESCRIPTION

Sika’s hybrid technology of low tension calcium sulphate combines with fast drying of cementitious systems.
Sika Sikafloor 4020 FiberLevel is a special high polymer formulation with embedded fibres to provide reinforcement suitable for wood, timber or CFC type subfloors.

USES of Sika Sikafloor 4020 FiberLevel

▪ Recommended underlayment for all Commercial and Domestic floor coverings
▪ Suitable to be applied over semi-flexible substrates such as soundly fixed/adhered timber, chip board, plywood or CFC sheet
▪ Suitable to be applied with underfloor heating systems
▪ Levelling of new or old concrete substrates
▪ Levelling over soundly adhered tiles, stone or vinyl
▪ Interior applications

CHARACTERISTICS / ADVANTAGES OF Sika Sikafloor 4020 FiberLevel

▪ Fibre reinforced
▪ High compressive and flexural strength
▪ Very low VOC
▪ Fast drying
▪ Light foot trafic after 2hrs
▪ Good potlife
▪ Install moisture sensitive flooring after 6hrs
▪ Versatile subfloor application

SUSTAINABILITY

IBU Environmental Product Declaration (EPD)

APPROVALS / CERTIFICATES

▪ Green Star (VOC-SCQMD Rule 1168)

PRODUCT INFORMATION

Composition:
Hybrid technology, containing calciumsulfate and cement

Packaging:
20 kg bags

Appearance / Colour:
powder, white

Shelf life:
Unopened bags can be stored for up to 12 months in a cool, dry and weatherproof environment.

Storage conditions:
Bags must be stored off the floor. Avoid sitting bags in direct sunlight prior to application.

APPLICATION INFORMATION

Mixing ratio:
4.3 – 4.4 Litres of clean cool water per 20 kgs of powder

Yield:
12 Litres
1m2 @ 12mm thickness

Layer thickness:
3 – 20 mm

Ambient air temperature :
+5 ºC min / -35 ºC max.

Substrate temperature:  
+5 ºC min / ~30 ºC max.

Pot Life:
~20 min. at 23 ºC

Waiting time to overcoating:
Allow 6 – 7 hours at 23°C prior to installing moisture sensitive flooring.
Allow 5 – 6 hours at 23°C prior to installing tiles or stone.

Important Note:
Before tiling, the dry Sikafloor 4020 FiberLevel surface must be primed with Sikafloor® 01 Primer (AU) or Sikafloor® 08 Primer “NEAT” undiluted.
The undiluted applied Sikafloor® 01 Primer (AU) or Sikafloor® 08 Primer (AU)must dry for 2 hours minimum before tiling begins.

Applied product ready for use: Light foot traffic after ~2 hours.