Megapoxy 132 High Strength Epoxy Coating

4.5 Litre Kit – comprising 3 Litres Part A, 1.5 Litres Part B
15 Litre Kit – comprising 10 Litres Part A, 5 Litres Part B
30 Litre Kit – comprising 20 Litres Part A, 10 Litres Part B
Clear and Grey (N35) Selections

Description

Megapoxy 132 High Strength Epoxy Coating is a two component, solvent free, low viscosity protective floor coating suitable for a variety of commercial and industrial applications.
With the inclusion of Coloured Pigment Megapoxy 132 High Strength Epoxy Coating provides a decorative surface finish with aesthetically pleasing appearance, high strength, abrasion resistance and serviceability to allow regular cleaning.
AS 4020:2018 Potable Water Approved
Megapoxy 132 High Strength Epoxy Coating is free from any suspected or potential carcinogens or mutagens and will not taint foodstuffs. Megapoxy 132 High Strength Epoxy Coating conforms to the requirements of the Department of Primary Industries for coatings and floorings used in food processing establishments such as abattoirs for export purpose.
Megapoxy 132 High Strength Epoxy Coating is volatile organic compounds free (Nil V.O.C.) and is suitable for coating and protecting structures that are in contact with foodstuffs and potable water.

Features and Benefits

• VOC Free
• Simple 2:1 mix ratio
• Easily mixed by hand or mechanically
• Can be applied by brush, roller, squeegee or airless spray
• Can be used with fine aggregates to make screed floors
• Accepts fine aggregates broadcast between coats for non-slip
• Excellent tensile and compressive strengths, superior to concrete
• Excellent chemical resistance
• High gloss finish

Recommended Applications

• Food and Beverage Production Facilities
• Pharmaceutical Industries
• Hospital and Catering Kitchens
• Factory and Warehouse Floors
• Bakeries
• Forklift Ramps and Driveways

How to Use

Megapoxy 132 High Strength Epoxy Coating is a low-viscosity, epoxy resin for many types of filling and coating applications.

It is a high strength coating, stocked in clear and N35 grey with other colours available by special order in the 30 litre kits.

Megapoxy 132 High Strength Epoxy Coating is available in conveniently pre-packaged 4.5 litre, 15 litre and 30 litre kits with a simple 2:1 mix ratio.

It has a 30 minute work time and a 24 hour cure time at 25ºC.

Surface Preparation

Before you begin mixing, you need to ensure that all contact surfaces like metal, concrete and stone are clean and clear of oil, dust and any other surface contaminants.

Concrete and stone surfaces should be prepared by grinding the surface and removing all the dust and debris. Concrete surfaces should be ground back or as a minimum acid etched to ensure effective bonding contact.

Safety and PPE

Megapoxy 132 High Strength Epoxy Coating is VOC-free.
As with all epoxy resins, please wear appropriate PPE, including eyewear gloves and clothing.

Mixing

IMPORTANT. Only make a suitable quantity that can be used within the 30 minute work time!

Megapoxy 132 High Strength Epoxy Coating is easily mixed by hand.
For larger projects and larger volumes of product, you can mix mechanically.

Using measuring tubs, pour the required amount of Part A. Allow enough volume in the mixing tub for the full amount of epoxy. Pour in the correct amount of Part B.

We recommend mixing Megapoxy 132 High Strength Epoxy Coating for 3 minutes using a timer.

Set the timer for 2 minutes.

Begin by placing a flat spatula into the mix (to the base of the tub) and slowly stir. The two parts will be still visibly streaky until combined. Ensure you scape around the base and sides to gather all the un-mixed epoxy and continue to mix.

After 2 minutes scrape any un-mixed product off the sides of the container and the spatula before mixing again for a further one minute (set timer).

After the one minute is complete the Megapoxy 132 High Strength Epoxy Coating should appear clear and streak-free, and ready for use.

Application

Megapoxy 132 High Strength Epoxy Coating is recommended for:
• surface repairs and protection;
• for floor coatings; concrete protection and surface sealing;
• fibreglass and carbon fibre;
• craft applications.

It is ideal for protecting and waterproofing structural concrete and timber, and is approved for food and beverage production (Complies with AS/NZ 4020:2018 testing of products for use in contact with drinking water). It can be used for decorative surfacing and in factories, sporting complexes where high abrasion resistance and serviceability are required.

It can be applied with a brush, poured or rolled. Cut-in edges with a brush before roller coating.

Two thin roller coats will give the best result. Ensure you leave time for the first coat to set (6 hours) before applying the second coat.

Clean-up

Uncured Megapoxy 132 High Strength Epoxy Coating can be cleaned with Megapoxy Thinners.

Please Dispose of contents and container in accordance with local, regional, national and international regulations.

Finishing

Although applying Megapoxy 132 High Strength Epoxy Coating is easy and fast, it will cure stronger than concrete with good chemical resistance and can be machined, sanded and polished to a fine finish.

For further technical information, refer to TDS.