Mapei Ultraplan Renovation Self Leveller

20kg bags

DESCRIPTION:

Mapei Ultraplan Renovation Self Leveller is a fibre-reinforced self levelling compound,
designed for interior use in the refurbishment of existing floors in both commercial
and domestic applications, for thicknesses from 3 to 40 mm in a single application,
that can be hand or pump applied.

APPLICATIONS:

Where to use Mapei Ultraplan Renovation Self Leveller:

Internal floors for new or existing:
• concrete,
• screeds,
• stone,
• terrazzo,
• ceramic tiles,
• old or new timber floors,
• floor boards,
• chipboard panels,
• plywood
• parquetry.

Mapei Ultraplan Renovation Self Leveller is suitable where good resistance to loads is
required, also for wheelchair traffic and underfloor and undertile heating systems.

SUBSTRATE PREPARATION:

The substrate should be solid, free of dust, loose particles, paint, oil, gypsum residues
or other contamination that could compromise the bond.

Timber substrates should be clean and solidly fixed, open joints should be sealed with
either Nivorapid mixed with Latex Plus or Planiprep SC mixed with Latex Plus.

Cementitious surfaces that are not sufficiently compacted must be removed or where possible
consolidated with Prosfas or Mapeproof 1K Turbo.

Cracks in the substrate should be repaired with Eporip.

The substrate should be primed with Mapeprim SP or Eco Prim T Plus prior to the application
of Ultraplan Renovation.

Timber or particle board substrates are to be primed with Eco Prim Grip.

Please note that some brands of chipboard contain wax coatings or sealers that must be
removed by mechanical means prior to applying a primer.

Check the humidity content with a carbide hygrometer or an electric moisture meter to
ensure compliance with the Australian Standards before commencing work.

Concrete or cementitious surfaces must comply with a minimum surface rating of CSP #3.

For all other forms of substrates and for further Surface Preparation information, please
refer to MAPEI’s Surface Preparation Requirements brochure – Floor Covering Installation
System available on our website www.mapei.com.au

TECHNICAL DATA:

Workability time: 30-40 minutes.
Thickness applied: from 3 to 40 mm.
Set to light foot traffic: approx. 4 – 6 hours.
Waiting time before laying: 1 – 3 days depending on thickness
Application: trowel
EMICODE: EC1 R Plus – very low emission.
Green Star™: very low VOC content (g/l) – contributes valuable points towards Green Star™ credits
Colour: Grey
Storage: 12 months.
Consumption: 1.8 kg/m² per mm of thickness (11mm depth per m2)
Packaging: 20 kg bags.