Dy-Mark Spray Writer – 350g

General

Dy-Mark Spray Writer is a toluene-free, reduced toxicity making paint with low odour and is ideal for all natural and cut timber applications. Utilising a 360° valve for any angle application, Spray Writer is suited for the forestry, timber processing and construction industries.

Directions For Use

Suitable Surfaces:

• Natural and Cut Timber, Concrete, Masonry and Bitumen

Ideal Application Temperature:

• Between 5ºC and 40ºC.
• Avoid use in windy conditions.

Before Spraying:

• Shake can for at least 45 seconds AFTER the mixing ball begins to rattle.
• Shake can occasionally during use.

Application:

• Hold can UPRIGHT or in the INVERTED position (upside down), and spray with the nozzle approximately 15-25cm from the surface. Adjust the spray width by moving closer or further away from the surface to be sprayed.

Coverage:

• Approximately 2m2 per can (depending on the surface).

Drying Time:

• Dry in 10 minutes (@25ºC)

Technical Data

• Size: 350g Aerosol
• Colour: 8 standard and 6 fluorescent colours
• Finish: Matt
• Consistency:Liquid
• Propellant:Hydrocarbon / Dimethyl Ether

Storage

• Store locked up.
• Protect from sunlight.
• Do not expose to temperatures exceeding 50ºC/12ºC.
• Store in a well-ventilated place.

Disposal

Pressurised container:

• Do not pierce or burn, even after use.
• Aerosol should be completely emptied prior to disposal.
• Dispose of contents/container according to regional regulations.

First Aid/Safety Information

Please refer to the Safety Data Sheet (SDS) before use. 
To view the correct SDS, please refer the back of the can under the section “CONTAINS” to confirm which formulation is used and to match up the details with Section 3 of the SDS which contains the formulation.
Safety data sheets are also available from the dymark website at www.dymark.com.au