Dy-Mark Protech Chlorinated Brake and Parts Cleaner – 500g

General

Dy-Mark Protech Chlorinated Brake and Parts Cleaner is formulated for the rapid and safe removal of brake fluid, grease, oil and other contaminants from brake linings, pads, drums and other metals parts. Dy-Mark Protech Chlorinated Brake and Parts Cleaner cleans without disassembling the brake unit, is non staining, leaves no residue and is non-corrosive. Dy-Mark Protech Chlorinated Brake and Parts Cleaner does not contain carbon tetrachloride, silicones, CFC113 or methyl chloroform. Its formula helps to stop disc brake squeal and eliminate clutch slippage.
Uses a 360° valve for upright inverted applications.

Directions For Use

Recommended Uses:

• Disc brakes, clutch plates, drum brakes, forklifts, linings, calipers, pads, industrial machinery, and other metal parts.

Application:

• Shake can well.
• Shake can occasionally during use.
• 360 degree valve enables spraying in upright and inverted positions.
• Do not spray at 45 degree angle.
• Spray parts generously to remove brake fluid, grease, oil and other contaminants.
• Dry with soft cloth or allow to air dry.
• Repeat application if necessary.
• Do not spray on hot or running engines.
• Do not contact battery terminals or starter solenoid with can.
• Do not use on painted surfaces.
• Prolonged exposure to rubber not recommended.
• Contains Tetrachloroethylene.

Technical Data

• Size: 500g Aerosol
• Colour: Clear White
• Consistency:Liquid
• Propellant: Carbon Dioxide

Storage

• Protect from sunlight./li>
• Do not expose to temperatures exceeding 50°C/122°F.

Disposal

Pressurised container:

• Do not pierce or burn, even after use.
• Aerosol should be completely emptied prior to disposal.
• Dispose of contents/container according to regional regulations.

First Aid/Safety Information

Please refer to the Safety Data Sheet (SDS) before use. 
Safety data sheets are also available from the dymark website at www.dymark.com.au

Disclaimer

The information provided within this Technical Data Sheet is intended as a guide only. The performance of this product will depend on many factors outside the control of Dy-Mark; including surface preparation, surface-specific conditions, surface types, correct application and environmental conditions.
Dy-Mark recommends customers undertake their own risk assessment prior to use, to determine the suitability of the product for the particular use intended.
It is essential that a sample of the product be applied to the intended area of use to ensure it is acceptable in appearance and finish and that it performs on the specific surface.
For further information please contact the Dy-Mark Sales and Customer Support Centre on 1300 396 275.