Details:
CorrosionX HD Heavy Duty Anti Corrosion Penetrant
– 341g Aerosols,
– 473ml Trigger Spray,
– 3.79 and 18.93 Litre Bulk Liquids
CorrosionX HD Heavy Duty Anti Corrosion Penetrant is a high performance thickened-film version of CorrosionX. It was developed specifically for marine environments to provide maximum protection against moisture intrusion and the resulting rust and corrosion. As well as a corrosion inhibitor, CorrosionX HD is an ideal lubricant for heavy port and marine gear where grease isn’t the preferred option. Also perfect as an assembly compound in the workshop or to prevent galling when installing stainless steel components.
CorrosionX HD Heavy Duty Anti Corrosion Penetrant is quickly applied and forms a dripless, dynamic, non-hardening, self-healing film. HD stubbornly resists erosion by splash or spray – including complete submersion in saltwater. It will slowly penetrate existing rust and corrosion, remove moisture and stop electrolysis through polar bonding and sealing out moisture. Unlike wax coatings, it will not dry out, stiffen or crack under stress.
Veropes Germany has independently tested wires lubricated with CorrosionX HD compared to an unlubricated wire. The unlubricated rope failed after 24,000 bending cycles. The wire protected with CorrosionX HD lasted 59,000 bending cycles, an increase in lifespan of 150%.
FEATURES AND BENEFITS:
CorrosionX HD Heavy Duty Anti Corrosion Penetrant provides extra long-term corrosion protection. It is a high performance, thick-film version of CorrosionX. Designed to provide maximum protection against moisture intrusion and resulting corrosion. Withstands sulpheric and marine environments. Applicable for even occasionally submerged applications. Superior anti-seize replacing messy tape, traditional anti seize products and tacky coatings. Recommended by Voyager Trailers, Aakron and Express Trailers.
CorrosionX Heavy Duty is quickly applied and forms a dripless, dynamic, non- hardening, self-healing film. HD stubbornly resists erosion by splash or spray – including complete submersion in saltwater. It will slowly penetrate existing rust and corrosion, remove moisture and stop electrolysis through polar bonding and sealing out moisture. Unlike wax coatings, it will not dry out, stiffen or crack under stress.
UNIQUE PERFORMANCE:
CorrosionX HD Heavy Duty Anti Corrosion Penetrant has unlimited shelf life.
It does not dry or go sticky.
It does not pick up dirt.
Lubrication factor of 0,4 , about 3 times better than engine oil.
Safe to 25.000 Volt.
Protects and penetrates even into rusty hydraulic fittings, bolts, hinges, locks, chain drives and winch cables.
Used on chains and sprockets it will not need to be cleaned off, but can simply be topped up with new product.
Non-flammable.
Can be welded over without splattering.
Applicable over wet and rusty surfaces.
Extremely resistant to Methane, Chlorine and Sulphur.
Used on heavy duty chains and cables even submerged on a regular basis.
DIRECTIONS OF USE
Spray, brush or roll onto surfaces.
Can safely be used on electrical connections, terminations, switches and lugs.
Dielectric strength is 25.000 volt.
For exposed installations like bridges or anchor winches apply a rich coat.
Do not apply in areas where people step.
Extremely slippery coating !
Clean up with Xtreme clean, degreaser or strong detergent.
SUGGESTED APPLICATIONS:
Drive Chains
Fork Lift Chains
Sprockets
Hinges
Steel Cables
Pins
Bolts
Brake Lines
Roller Doors
Live Stock Trailers
Exposed Electrical Contacts
Container Doors
freezer Installations
hydraulic Hose Connectors
Anchor Winch Motors
Mining “Longwall” Installations
Wastewater Works
Fertilizer Plants
Salt Works
Outdoor Storage of Equipment.
Additional Information:
Categories: Corrosion Inhibitors, Automotive Care, CorrosionX, Lubricants, Oils and Treatments
Tag: CorrosionX